Can a 3000mw laser engrave metal?

The output power of semiconductor laser is 0-50w; The laser power of CO Ψ type: 10W, 30W, 50W, 100W; The laser power of YAG galvanometer is 50W; Optical fiber type power size: continuous 5W, 10W, 20W to 400W, 1000W above, pulse 10W, 15W, 20W, 25W, 30W to 50W.

Composition and structure: laser power supply, fiber laser marking machine laser power supply is to provide power for the fiber laser device, its input voltage is AC220 V AC. It is installed in the control box of the marking machine.

Fiber laser, fiber laser marking machine using imported pulsed fiber laser, its output laser mode is good, long service life, is designed and installed in the case of marking machine. Galvanometer scanning system is composed of optical scanner and servo control. The whole system is designed and manufactured with new technology, new material, new process and new working principle.
laser engraving machine for metal
mini laser engraving machine for metal

Focusing system, mainly F- θ Lens, different f- θ The focal length of the lens is different, and the marking effect and range are also different. The imported high-performance focusing system is selected for the fiber laser marking machine. The standard lens focal length f = 160mm, and the effective scanning range Φ 110mm。

Computer control system is not only the center of control and command of the whole laser marking machine, but also the carrier of software installation. Through the coordinated control of acousto-optic modulation system and galvanometer scanning system, the workpiece marking process is completed. The computer control system of fiber laser marking machine mainly includes chassis, motherboard, CPU, hard disk, memory module, D / a card, floppy drive, display, keyboard, mouse and so on.

Laser can process almost any material, but limited by the power of the laser transmitter, the materials that can be processed by "LeiBao" laser engraving and cutting machine are mainly non-metallic materials, and the materials of "Guanglian" laser engraving and cutting machine are mainly metallic materials.

It includes: plexiglass, plastic, double color board, glass, bamboo wood, foam plastic, cloth, leather, rubber plate, stone, artificial stone PVC board, wooden product, metal plate, crystal, Keli, paper, alumina, resin, spray metal.
plastic laser engraving machine for sale


Laser engraving plate making completely imitates and optimizes the design of manual plate making. After laser engraving plate making was introduced to the market, in ten years, through software upgrade, it realized engraving with 0.3mm slope and automatic compensation of light attenuation at carving corners. Improve the speed of automatic engraving. Basically hand engraving plate out.

In addition, laser engraving plate, completely eliminate errors in engraving, manual engraving inevitable engraving errors, the original is good, manual engraving a knife error, the whole layout scrap, if found not in time, often cause the whole batch of carton scrap. Laser engraving is the use of software, the original input automatic engraving, there is no engraving error.