Correct installation process of Laser marking machine

Laser marking machine is a kind of laser equipment that marks on the surface of various materials by laser beam. Laser marking machine is widely used. In today's society, we can see everywhere where Laser marking machines are used, such as mobile phones, food and beverage packaging, industrial products such as electronic components, plastic pipes, paper packaging boxes, wooden packaging boxes, gift packaging industry and so on. What is the function of Laser marking machine?

 

  1. Non contact laser marking is processed by non mechanical "light knife", which can print marks on any regular or irregular surface of the Laser marking machine, and the workpiece will not produce internal stress after marking, so as to ensure the original accuracy of the workpiece. There is no corrosion on the working surface, no tool wear, no poison and no pollution.

 

  1. The engraving precision is high, and the engraving pattern of Laser marking machine is fine, and the minimum line width can reach 0.04mm. The mark is clear, lasting and beautiful. Laser marking can meet the needs of printing large amounts of data on very small plastic parts. For example, it can print two-dimensional bar code with higher accuracy and clarity. Compared with embossing or jet marking, UV Laser marking machine has stronger market competitiveness.

 

  1. Permanence such as marking will not fade due to environmental factors (touch, acidic and alkaline gas, high temperature, low temperature, etc.).

 

  1. Anti counterfeiting using laser marking technology carved out of the mark is not easy to copy and change, to a certain extent, has a strong anti-counterfeiting.

 

The correct installation process of fiber Laser marking machine:

 

  1. When installing, we must consider the mechanical connection between the main parts of metal plate and solid processing parts, spring washer and washer, in order to increase the two things of the course. The end pump Laser marking machine should ensure that there is no vibration and loosening of screws.

 

  1. In the part of electrical control device, we must consider the reasonable control circuit, the electrical component box should have a certain dust-proof function, in addition, we need to pay attention to the sudden power failure, so as to avoid the normal start of the marking equipment.

 

  1. The rest is that the optical path of red calibration must be completely accurate, the height of optical axis of module height must be the focus of the same red light, and the double chamber of oscillation must be adjusted to the most appropriate position. When the first half mirror is well adjusted, the half mirror frame is locked and cannot be moved.