Fiber laser marking machine

In recent years, fiber laser has become a hot topic in the research of laser physics. It is considered that it is a new generation of products that can completely replace solid-state laser. Fiber laser is a kind of laser using rare earth doped glass fiber as gain medium. Fiber laser can be developed on the basis of fiber amplifier. Under the action of pump light, high power density is easily formed in the fiber, which results in "particle number inversion" of laser energy level, When the positive feedback loop is added properly, the laser oscillation output can be formed.
Jewelry laser marking machine

Fiber laser has become a hot spot in the research of laser physics. It is considered as a new generation of products to replace solid-state laser. Fiber laser marking machine uses laser beam to make permanent marks on different material surfaces. The effect of marking is to expose the deep material through the evaporation of the surface material, or to "carve" the trace through the chemical and physical changes of the surface material caused by the light energy, or to burn off part of the material through the light energy, and to show the required etched patterns, words, bar codes and other graphics

The so-called fiber laser marking machine refers to the use of fiber laser in the marking machine. The fiber laser has the characteristics of small volume (no water cooling device, air cooling), good beam quality (basic mode), maintenance free, etc.
Ceramic tile laser engraving machine

I bought the optical fiber laser marking machine from Wuhan chura laser. I bought it in June last year. I felt that the quality was ok, there was no problem, and the speed was very fast. The most important thing was that the price was much cheaper than Han's, San Gong's and Yue Ming's. at that time, I also bought it from many companies. Chura was the cheapest, so I bought it. Now it seems that my original choice is still correct, Now the processing fee of this machine can basically recover the cost. I'm going to buy another one in February next year. Now I have more work to process. This is my own experience for your reference
Home laser engraving machine

1. What kind of material should be marked, and whether there are requirements for depth and speed

For depth and speed, it is recommended to buy a laser above 30W

2. How large is the marking area

The larger the area is, the higher the laser power is required

3. Are there any special requirements for laser marking machine configuration?