How good are boss lasers?

(1) High precision, high speed, narrow cutting seam, small heat affected zone, smooth cutting surface without burr.

(2) The laser cutting head will not contact with the material surface and will not scratch the workpiece.

(3) The slit is narrow, the heat affected zone is very small, the local deformation of the workpiece is very small, and there is no mechanical deformation.

(4) Flexible processing, can process any graphics, can also cut pipes and other profiles( 5) It can cut steel plate, stainless steel, aluminum alloy plate, cemented carbide
Metal laser engraving machine

The particularity of laser emission principle and production process determines that laser has the characteristics that ordinary light does not have: three good (good monochromaticity, good coherence, good directivity) and one high (high brightness).
Computer laser engraving machine

1 good monochromaticity: the photons emitted by ordinary light sources are different in frequency, so they contain various colors. The frequency of each photon emitted by laser is the same, so laser is the best monochromatic light source.

Because the biological effect of light strongly depends on the wavelength of light, the monochromaticity of laser has been widely used in clinical selective therapy. In addition, the monochromatic characteristic of laser has been widely used in spectral technology and optical measurement, and has become an important means of basic medical research and clinical diagnosis.
Fiber laser engraving machine

Good coherence: because the photons of stimulated radiation are consistent in phase, and the mode selection function of the resonant cavity, there is a fixed phase relationship between the points on the cross section of the laser beam, so the spatial coherence of the laser is very good (the ordinary light produced by spontaneous emission is incoherent light). Laser provides us with the best coherent light source. It is because of the advent of laser that the coherent technology has been developed by leaps and bounds, and the holographic technology has been realized.

3 good directivity: the divergence angle of the laser beam is very small, almost a parallel light, and the diameter of the spot formed when the laser irradiates on the moon is only about 1km. The light emitted by ordinary light source shoots in all directions. In order to concentrate the ordinary light along a certain direction, the concentrating device is often used. But even the best searchlight, if it projects its light on the moon, the spot diameter will be expanded to more than 1000 km.
Acrylic laser engraving machine

The good directivity of laser beam is mainly used in medicine because the laser energy can be highly concentrated in space, so that the laser beam can be made into a laser scalpel. In addition, according to geometrical optics, the better the parallelism of the beam, the smaller the focal spot size by focusing. In addition, the better the monochromaticity of the laser, the colorless astigmatism after focusing, so that the spot size can be further reduced to less than micron level, and can even be used as a fine "scalpel" for cutting cells or molecules.

High brightness: the brightness of laser can be 1012-1019 times higher than that of ordinary light source, which is the brightest light source at present. High intensity laser can even produce high temperature of hundreds of millions of degrees. The high energy of laser is one of the most valuable basic characteristics to ensure the effectiveness of laser clinical treatment. The high energy of laser can also be used in laser processing industry and national defense.