laser engraving machine usa l

Using laser engraving machine, the process is very simple, just like using computer and printer to print on paper. In WIN98 / WIN2000 / WinXP environment, you can use a variety of graphics processing software, such as CorelDRAW to design. Scanned graphics, vectorized graphics and a variety of CAD files can be easily "printed" to the engraving machine. The only difference is that printing uses toner on paper, while laser engraving uses laser on wood, acrylic, plastic, metal, stone and almost all other materials.

1. Dot matrix engraving dot matrix engraving is similar to high definition dot matrix printing. The laser head swings left and right to carve a line composed of a series of points each time. Then the laser head moves up and down at the same time to carve multiple lines, and finally forms a whole page of image or text. Dot matrix engraving can be used for scanned graphics, text and vectorized graphics.
Micro laser engraving machine

2. Engraving speed: engraving speed refers to the moving speed of the laser head, usually expressed in IPS (inch / second). High speed brings high production efficiency. Speed is also used to control the depth of cutting. For a specific laser intensity, the slower the speed, the greater the depth of cutting or carving. You can use the engraving machine panel to adjust the speed, you can also use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%. Hummer's advanced motion control system enables you to get super fine engraving quality at high speed
Jade laser engraving machine

3. Engraving intensity: engraving intensity refers to the intensity of the laser beam on the material surface. For a specific carving speed, the greater the intensity, the greater the depth of cutting or carving. You can use the engraving machine panel to adjust the intensity, you can also use the computer's print driver to adjust. In the range of 1% to 100%, the adjustment is 1%. The greater the strength, the greater the speed. The deeper the cut is
Laser engraving machine for leather

4. Spot size: the spot size of laser beam can be adjusted by lenses with different focal lengths. The lens with small spot is used for high resolution engraving. Large spot lens is used for low resolution engraving, but it is the best choice for vector cutting. The standard configuration of the new device is a 2.0-inch lens. Its spot size is in the middle, which is suitable for various occasions.

5. Engravable materials: wood products, plexiglass, metal plate, glass, stone, crystal, Corian, paper, double color plate, alumina, leather, resin, spray metal.