What brand of small engraving machine is good? 5 tips of engraving machine recognition for your life

What brand of small engraving machine is good? Many want to buy engraving machine friends often ask such a question. Let's not talk about whose machines are good or bad. Let's talk about some tips for choosing small machines. Five points to pay attention to when purchasing small engraving machine

The first point: carving materials.

Not all the problems can be solved by choosing one machine. Different materials can carve different machines. For example, if you want to carve metal products, the most suitable machine is fiber laser engraving machine. Because the optical fiber laser engraving machine refers to the energy released when the laser beam irradiates the surface of the workpiece to make the workpiece melt and evaporate, the purpose of engraving has been achieved. It uses the laser beam emitted from the laser generator to focus into a laser beam with high power density through the optical path system. The heat of the laser is absorbed by the workpiece material, and the temperature of the workpiece rises sharply. When it reaches the boiling point, the material begins to vaporize and form engraving marks. With the high-pressure air flow, with the relative position of the beam and the workpiece moving, the material finally forms marks. Therefore, the use of optical fiber laser engraving machine is the most suitable for metal engraving. What about other materials? Not all customers will use laser engraving machine to carve metal. Carving of non-metallic materials, such as plastic, leather, glass, ceramics, bamboo, jade, non-woven fabrics, etc., can be done with a small engraving machine. If the depth of carving is only required to have traces on the surface. So 7W and 10W small engraving machine is fully able to meet the requirements. Household small carving machine 3W machine is more suitable, can carve some small fruit, small leather toys, small thin wood and so on.


Second, the size of the engraving format


Because our small engraving mainly faces the customers of company proofing, DIY engraving, gift customization and small batch engraving, there will not be much demand for large area engraving in the engraving format. Let's see which engraving machine area several small engraving machines can meet. The engraving area of the hanging white engraving machine is 14.5 * 17cm. The engraving area of the hanging black engraving machine is 20 * 17cm. The carving area of household micro engraving machine is 80 * 80cm, and that of fixed focus small engraving machine is 19 * 24cm. Longmen 29 * 22cm. The marking range of metal engraving machine is 110 (F = 160mm). Basically, these kinds of carving area can meet the needs of customers. However, if there is a large area of demand for customers, we also prepared a large area of 65 * 65cm and 40 * 50cm engraving machine to meet the needs of customers. But relatively speaking, large area, carving speed will be slower. Therefore, in the selection of small engraving machine, according to their own engraving area to buy machine is also one of the key reference conditions


Third, engraving machine hardware.


There are two core hardware of the small engraving machine, the first is the laser head, and the second is the chip. The chip can guarantee the carving speed and precision, while the laser head can guarantee the carving quality. Let's take the engraving machine for example. The fixed focus engraving machine uses AVR chip, which can improve the speed and precision, and the minimum character is 2mm English letters. The laser head is fixed focus laser head, which has good heat dissipation function. Therefore, the choice of the machine must depend on the hardware equipment, although there are only a few hardware and chips on the market of small laser engraving machine, which are quite clear in the industry. However, in order to ensure the carving quality and the carving relationship between products, the choice should be carefully considered.


Fourth, operation mode

The small engraving machine adopts software operation mode, which is relatively simple to debug. Generally, the adjustment is nothing more than engraving speed, depth and engraving power. You need to import characters or pictures into the software to adjust the size, depth, speed and preview. In fact, the more difficult problem is the focus and alignment of engraving machine, which is relatively troublesome. However, the problem of this mode of operation, the general business will have after-sales customers will provide help. Choice in the choice of machines, after-sales service is also an aspect.

Maintenance of laser head

The so-called laser engraving machine, the laser head is the main working tool, in order to extend the life of the laser head, our small engraving machine in use should try to carve 50 minutes after the rest of about 10-15 minutes. Of course, the nature of small engraving machine is the same, whether it is our machine or other laser engraving machine, the maintenance of laser head is particularly important.


What brand of small engraving machine is good? 5 tips of engraving machine recognition for your life