What is the difference between laser marking machine and laser engraving machine?

What is the difference between laser marking machine and laser engraving machine? Known as laser marking machine, laser beam is used to mark the surface of different materials permanently. Laser engraving machine is an advanced equipment that uses laser to carve the materials that need engraving. Laser marking machine laser engraving machine is generally characterized by the use of laser processing, advertising equipment. The product can be used not only in advertising industry, but also in various packaging industries. The product can be used not only in advertising industry, but also in various decoration and automobile industry. Now, let's talk about "the difference between laser marking machine and laser engraving machine".

What is the difference between laser marking machine and laser engraving machine?

The difference between laser marking machine and laser engraving machine is that the working range is different.

The working area of the laser is not very large, nor is it as big as an ordinary table.

Part of the small power laser engraving machine processing format is not large, but part of the high power laser engraving machine is mainly used for metal cutting, processing format is large, at least one bed size.

2. The difference between laser marking machine and laser engraving machine is speed.

The speed of laser marking machine is much faster than that of laser engraving machine, just like that of mineral water manufacturer, the production line takes about 100 meters per minute.

3. There are three differences between laser marking machine and laser engraving machine.

It can carve laser engraving machine in larger stroke size, and also can cut far beyond laser.

There are four differences between laser marking machine and laser engraving machine: laser is different.

In the laser engraving machine, the optical system consists of three mirrors and a condenser, one of which is usually carbon dioxide glass tube. Generally, the service life of glass tube is between 2000-10000 hours. CO2 glass tubes are all disposable. Generally, the working life of laser marking machine is more than five years, and its working principle is: metal tube marking machine (non-metal) and YAG solid-state laser marking machine (metal). Refillable metal tube for laser marking machine.

5. The difference between laser marking machine and laser engraving machine is: the price is different.

Different materials corresponding to the laser marking machine prices are not the same, ranging from tens of thousands to hundreds of thousands. Nonmetal laser cutting machine and small laser cutting machine are much cheaper in price. But laser engraving machines for cutting thick metals are also very expensive.

Application of laser marking machine in laser engraving machine?

Application fields of laser marking machine:

(1) Applicable to all kinds of metals: electronic hardware industry logo. Perhaps many people do not understand, some hardware accessories, electronic components, will be marked with laser marking machine. In automobile, ship, machinery, equipment and other materials with large friction, laser marking can achieve the effect of wear resistance and auxiliary industry marking.

(2) Used in metal processing industry, such as it industry, communication, machinery manufacturing, food, medical equipment, watch glasses, craft gifts, precious metal jewelry, leather, packaging and printing appliances, precision hardware, decorative materials, electrical appliances, instruments, etc.

It is suitable for non-metallic materials such as polymer materials, electronic components, wire speed limit, reflective film, copper foil, sapphire, glass, copper foil, signs and so on. For non-metallic materials using cold processing violet laser marking machine, this is what he is good at. His target industries are electronic communication, electrical appliances, instrumentation, precision hardware, watch glasses, jewelry, etc Ceramics, etc.

(4) For non-metal processing industries, such as clothing, leather, craft gifts, packaging, advertising, wood, textile, lamps, electronic communications, watches, glasses, printing, decoration, etc., identification can be realized. Good results have been achieved in the processing of wood, leather, plexiglass, epoxy resin, acrylic, unsaturated resin and other non-metallic materials.

At present, the application in the food industry mainly refers to the use of laser to make various information signs on the food surface, such as patterns, two-dimensional codes, etc. its advantages are no manual processing, more fine and clear printing effect, higher resolution, low failure rate, clean and pollution-free.

(6) Packaging direct industry. Everyone knows that laser marking machine, also known as laser inkjet printer, is the identification of labels on food and beverage packaging, cigarette label, medicine box, medicine bottle packaging on the lid of wine bottle. No matter what material it is, it is necessary to use laser marking machine to label the product, that is, the production date, batch number, QR code, etc.
Ceramic tile laser engraving machine

Application fields of laser engraving machine:

(1) With the rapid development of urban public facilities construction, street renovation, modern residential areas, hotels and office buildings, plaques, signs and signs have put forward a lot of demands for signs and guidance systems in line with international standards. Among them, plaques, signs and signs made by carving account for a considerable proportion. In order to establish a good corporate image and improve internal management, we should pay attention to the following aspects, Powerful enterprises have also transformed the company's plaques into carved breastplates and department plates, which has become a fashion trend.

Architectural model, mechanical model, vehicle model and ship model are the oldest design tools. Modern society has given models more new meanings and wider uses. It is no exaggeration to say that models are the model of industry. The model is necessary for the performance and display of machines, vehicles, ships, architectural design schemes, and the sale of commercial housing. The model itself also has independent activities and significance such as competition, commemoration and collection. Now, the engraving machine, which makes the modeling more exquisite and faster, has become the best assistant for the mold making.
Laser engraving machine for leather

(3) There are more and more arts and crafts, gifts and souvenirs. Medals, certificates, souvenirs and advertisements in meetings, tourism and other activities are all made of sculpture. Carving pens, leather goods, copper rings, lighters, watches, bottle openers, key chains, prize plates, crystal like ornaments, copper rings, shotguns, rings and other objects into patterns can reflect taste and personality. Carving interesting patterns into bookmarks, powder boxes, pendants, frames, silver and other objects can meet the needs of people's emotional communication.

Industrial processing the output of building materials in China has ranked first in the world. At present, it is developing rapidly in the direction of improving product quality and varieties. The engraving machine can easily and quickly make a large number of exquisite molds for gypsum ceiling, ceramic tiles, floor tiles and other building decoration materials, so that the decorative materials products processed by this mold are multiplied. In developed manufacturing countries, all kinds of brands, marks, job numbers and production flow charts necessary for parts surface marking, instrument manufacturing and enterprise standardization management are made by engraving machines. According to foreign surveys, in developed manufacturing countries such as Germany and Switzerland, two thirds of engraving machines have been used as machine tools in factories. China is becoming a "world factory". I believe that engraving machines will be put into Jindadi's production workshop.
Computer laser engraving machine

(5) Plexiglass process: plexiglass processing is one of the most ideal carving materials. No matter which processing method is used in the five major processes of "cutting", "milling", "carving", "carving" and "drilling", plexiglass has good processability, and plexiglass has always been used as experimental tools, models, POP advertising ornaments, small ornaments It is an ideal material for art lamps, craft gifts and souvenirs. The close combination of engraving machine and plexiglass will produce a variety of excellent products.